Karaoke Maker — Remove Vocals, Keep the Music
A karaoke maker turns any song into a backing track by removing the lead vocal while keeping the instruments exactly where they are. That is what this page does: upload a track, get a karaoke version in about a minute, and sing over it.
Unlike karaoke videos on streaming sites, you are not limited to the songs someone else chose to produce. Any track you have the rights to use can become your backing track, in its original key and arrangement. Runs are paid — the one-time $2.90 Trial Pack covers 15 minutes.
By StemSplit Audio TeamLast updated: Editorial standards
Trial Pack: 15 minutes for $2.90, one-time payment. Runs start after checkout.
Paid runs only · $2.90 Trial Pack includes 15 minutes · files deleted automatically after processing
Four stems, one upload
Every job returns the full set of separations, not just a karaoke-style instrumental. That means one upload gives you an acapella, a backing track, a drum loop and a bass line you can drop straight into your DAW.
What comes back in your download
Lead and backing vocals, harmonies and ad-libs, isolated so you can re-sing them, sample them or build an acapella.
Kick, snare, hats and percussion as one clean stem for remixes, drum practice and loop-based production.
Bass guitar and sub-bass separated from the mix, ready for sampling, transcription or replacing the low end.
Guitars, keys, strings, synths and background textures — every element that is not vocals, drums or bass.
The instrumental is simply your original track with the vocal stem removed — it is created in the same pass, so you get vocals, instrumental and the individual stems from a single upload.
Make a karaoke track from any song
The workflow is the same as any vocal removal: upload the song, let the AI separate the vocal from the instruments, and download the instrumental. What makes it a karaoke track is the result — the full arrangement without the singer, at the original tempo and key.
Because the model separates rather than filters, the backing track keeps its drums, bass, guitars and stereo image. It sounds like the record with the vocal muted, not like a thin, hollow version of the song. For most pop, rock, country and hip-hop tracks, that is close enough to sing over at home, at a party or in a rehearsal room.
What makes a good karaoke backing track
Three things matter: the vocal has to be gone, the band has to still sound like a band, and the timing has to stay intact. AI separation is strong on all three because it rebuilds each instrument rather than subtracting a channel. The low end stays warm, the drums keep their transient snap, and the stereo width remains.
Backing vocals are the one caveat. Harmonies and backing vocals are part of the vocals stem, so they are removed along with the lead. That is usually what karaoke singers want — but if a song relies on a call-and-response backing vocal, you may prefer to keep a little of the original vocal at low volume in your mix.
- Lead vocal removed, full instrumental kept.
- Original tempo, key and arrangement — no re-recording.
- Backing vocals and harmonies are removed with the vocal stem.
- Stereo image and low end preserved by AI separation.
How to make a karaoke version in three steps
First, buy the $2.90 Trial Pack — 15 minutes, one-time payment, no subscription. Then upload the song with the tool at the top of this page. The AI model separates the mix into vocals and instrumental, and a typical three-minute track is finished in around a minute. Download the instrumental — that file is your karaoke backing track.
If you also want the acapella for harmony practice, it is in the same download. Every paid run returns drums and bass too, which is useful if you want to build a custom arrangement or change the energy of a section.
Karaoke maker vs. karaoke apps and videos
Karaoke apps and video platforms offer a catalogue of tracks that someone else produced. They are convenient, but the catalogue is limited, the key is fixed and the arrangement may be a re-recording rather than the original. If your song is not in the catalogue, you are stuck.
A karaoke maker gives you the original recording as a backing track, for any song you have the rights to process. You are not limited to a catalogue, and you can edit the backing track afterwards — loop a chorus, cut a bridge, or export it into a recording app. The trade-off is that you have to process the song yourself, which takes about a minute and a small one-time fee.
- Catalogue karaoke: instant, but limited song choice and fixed arrangements.
- AI karaoke maker: any song, original recording, editable output.
- Catalogue tracks are licensed for karaoke use; check rights before public performance.
- AI output is a backing track you can edit, loop and re-export.
Recording vocals over your karaoke track
Once you have the instrumental, load it into any recording app and add a vocal track. Use headphones so the backing track does not bleed into your microphone, and record a few takes before choosing one. Most phones and laptops are good enough for a practice recording; for a release, use a proper mic and interface.
If the song is in the wrong key for your voice, transpose the instrumental in your DAW. Because the backing track is a normal audio file, any pitch-shifting tool will work — a semitone or two up or down usually sounds natural.
- Use headphones to stop the backing track bleeding into the mic.
- Record several takes and comp the best lines.
- Transpose the instrumental if the key does not suit your range.
- Export at 44.1kHz or higher if you plan to publish.
Karaoke, instrumental and acapella: what's the difference
A karaoke track and an instrumental are practically the same thing: the song without the lead vocal. An acapella is the opposite — the vocal without the instruments. Stems are the individual parts that make all of this possible.
One upload returns all of it: the instrumental for karaoke, the vocals stem for harmony practice or remix, and the drums and bass for production. That is the advantage of stem separation over a single-purpose karaoke tool.
Sample outputs are illustrative; real A/B samples will be added after launch. No customer counts, reviews or benchmark numbers are published on this page because we have not measured them yet. Every upload is processed only for your job and removed from working storage automatically within 24–48 hours — read the privacy policy.
System built-in method: Windows, macOS, phone and DAW
For a quick rehearsal backing track, the built-in center-channel method can be enough — and it is already on your desktop if you have any audio editor or DAW. Here is what each platform actually offers, with the real steps.
Windows 11 / 10
Windows has no built-in vocal remover. Voice Recorder and Clipchamp can record, trim or change volume, but they cannot separate or cancel a vocal.
- Install Audacity from the official site (audacityteam.org). It is free and open source, but it is not bundled with Windows.
- Open your song as a stereo track (File → Open). Mono files have no center channel to cancel.
- Select the whole track (Ctrl+A), then open Effect → Vocal Reduction and Isolation.
- Choose Action: Remove Vocals, keep the default settings and apply.
- Check the result on headphones: centered bass and kick are usually removed together with the vocal.
- Export with File → Export Audio and choose WAV or MP3.
Good for a rehearsal backing track. It cannot keep the low end and it cannot produce an acapella or stems.
macOS
macOS ships GarageBand, but GarageBand has no phase-invert plug-in — so the bundled app alone cannot cancel a centered vocal. QuickTime Player can trim and export audio, not separate it.
- Open the song in GarageBand (bundled) if you only need to trim, split or adjust level — that works.
- GarageBand's EQ can notch 1–4kHz to reduce vocal presence, but it also thins guitars, cymbals and snare.
- For actual center cancellation, use Audacity (free, cross-platform) and follow the Windows steps above.
- Logic Pro (paid, not bundled) includes the Gain plug-in with Phase Invert: split stereo, invert one side, then sum to mono.
- Listen in mono afterwards — phase tricks can sound different when a phone speaker folds the mix down.
Honest answer: macOS has no bundled vocal remover. GarageBand EQ is a partial workaround, not a separator.
iPhone & iPad
iOS and iPadOS have no built-in vocal remover for your own files. GarageBand for iOS can record and arrange, but it has no phase-invert control. Apple Music's Sing feature can lower vocals on supported catalog songs, but it streams only and cannot export an instrumental.
- Apple Music Sing: play a supported song, open the lyrics view and use the vocal slider to lower the vocal (Apple Music subscription required).
- There is no export: Sing is a playback feature, not a file tool, so it cannot give you a WAV or MP3 backing track.
- GarageBand for iOS can trim and arrange audio you import, but it cannot cancel or remove a vocal.
- iMovie can lower a clip's volume, not isolate a source.
- For real separation, open this site in Safari on the phone, or move the file to a Mac/PC and use a desktop method.
Phones are for listening and file handling. No iOS feature produces stems or a downloadable instrumental.
Android
Android has no system vocal remover. Files by Google, Google Photos and Google Drive can move or trim media, but none of them separate audio sources.
- Google Files and Drive can move the audio between apps, but cannot edit or separate it.
- Third-party Android 'karaoke' or 'vocal remover' apps usually run the same center-channel math and damage the mix.
- If an app asks you to upload the track to its server, read its privacy policy first — many keep files far longer than they say.
- For AI separation, open this site in Chrome on Android; the upload and download flow works in the browser.
- For manual phase cancellation, move the file to a desktop with Audacity.
Android's built-in apps do not separate stems. Treat app-store vocal removers as phase filters unless they clearly run an AI model.
DAW (Audacity, GarageBand, Logic Pro, REAPER)
Every DAW can perform center-channel cancellation manually if it supports channel splitting and phase inversion. This is the real built-in technique — no plug-in purchase required.
- Import the song as a stereo track and split it into two mono channels.
- Invert the phase (polarity) of one channel only.
- Sum both channels down to mono. Anything centered — usually the lead vocal — cancels out.
- In REAPER, use the item phase (polarity) button before summing; in Logic Pro, use the Gain plug-in's Phase Invert.
- Audacity's Effect → Vocal Reduction and Isolation automates the same math.
- Check the result on headphones: if the bass and kick vanished, the method worked as designed — that is its limit.
Instant and offline, but the output is a mono backing track, not stems. There is no acapella and no preserved low end.
Built-in method vs. AI separation
A built-in karaoke track is mono, hollow and missing its centered bass and kick. AI separation keeps the full band and returns the instrumental plus an acapella for harmony practice; the one-time $2.90 Trial Pack covers 15 minutes — about five songs.
Documentation we check for these steps: Audacity manual · Apple GarageBand · Apple Logic Pro · REAPER · Demucs (Meta AI) on GitHub · Replicate: cjwbw/demucs.
Frequently asked questions
Is there a free karaoke maker here?
No. There is no free-of-charge allowance: every separation costs GPU time, so every run is paid. The $2.90 Trial Pack is the cheapest entry point — 15 minutes, one-time payment, about five three-minute songs — and it returns the instrumental plus the other stems.
Can I make a karaoke version of any song?
You can process any song you have the rights to use. The tool works best on studio recordings with a clear arrangement; dense or live recordings may leave some vocal bleed in the backing track.
Will the backing vocals stay in the karaoke track?
No. Backing vocals and harmonies are part of the vocals stem, so they are removed along with the lead vocal. If you want them, mix a little of the original vocal back in at low volume.
Can I change the key of my karaoke track?
Yes — download the instrumental and transpose it in any DAW or audio editor. The download is a normal MP3 or WAV file, so any pitch-shifting tool works.
Can I use the karaoke track at an event or online?
We license you to use the separation service, but the rights to the song remain with its owners. Public performance, streaming or monetised use of a backing track may require a license from the rights holders.
What download format do I get?
Every paid run delivers MP3 320kbps and WAV — the Trial Pack included. WAV is the better choice if you plan to edit, transpose or record over the track.
Turn your song into a karaoke track
Buy the $2.90 Trial Pack, upload a track and download the instrumental. 15 minutes, one-time payment, original key and arrangement.
Read how the stem separation works, how your audio is handled, or contact the team.